What should I do if the power adapter heats up? And how do you maintain it?

How to deal with the heating of the Power Adapter?

It is inevitable that the power adapter will heat up, but we can speed up the heat dissipation and prevent the temperature from rising.

1, the selection of small pressure drop, low loss of switch components, heat dissipation area should be as large as possible, more than 100W switching power supply should generally have metal punched shell, or plus heat dissipation fan.

2, as far as possible to put the power adapter in a good place for ventilation and heat dissipation, do not put books and other things on the power supply.

3. When using the notebook in a high temperature environment, the notebook power adapter should be placed in a place that is not exposed to direct sunlight and ventilated; Do not put the power adapter near the heat outlet of the notebook, otherwise not only the power adapter heat will not escape, but also absorb some of the heat.

How to maintain the power adapter?

Power Adapters, also known as "regular power supplies," are a very common type of monitoring power supply. Take the power adapter as an example to illustrate how to maintain the outdoor power supply.

1. Keep out the sun and rain as much as possible. Suitable waterproof power box can be installed, the waterproof power box is reliably fixed with bulging screws, the power adapter is installed in the box, the box can also be installed with a power socket, such as power connector, network cable connector, video cable connector and so on are also hidden in the box.

2. Do not use the power cord to hang the adapter in the air, in case of safety accidents caused by short circuit of the joint, or the joint is broken down and hit people over time.

3. If network cable connectors, video connectors and DC power connectors are to be connected reliably, it is best to use cable ties to fix them to eliminate the stress of the connectors.

4. For adapters with screw holes, use screws to fix them in the waterproof power box. For adapters without screw holes, use foam tape to glue them in the waterproof power box.

For the power adapter heating treatment methods and maintenance work is introduced here, I believe you already know how to deal with these two situations, hope to help you!